Kingwood Underground
the heart and soul of our Kingwood, Texas family
Login - Create Account - Help
Clean out your garage on Kingwood bookoo! Or find local garage sales on Yard Sale Search.com
KU Live!

I'm refinishing my stairs

who's talking here?

TinktheSprite 7
andreweggplant 1
sheddy 2
sdanielmcev 4
Butterbean 4
mutton 1

     » send to friend     » save in my favorites     » flag dangerous topic flag as a dangerous topic

TinktheSprite --- 9 years ago -

I ripped the carpet out one rainy day because I couldn't stand the dirty grime any longer. Judging by the poor quality of the lumber and the build underneath, obviously, the intention was to cover up the stairs. Permanently. I have used so much putty and caulk to get them smooth again. 8 steps down, 7 more to go, then I prime and paint...something on it. 

Butterbean --- 9 years ago -

Yup. Vast majority of houses here are planned for carpeted stairs. I like it. With children, the sound is deadened a little.

Most builders don't use felting under them and eventually, the steps will creak. 

TinktheSprite --- 9 years ago -

The stairs are sound and solid. No creaking after 29 years. We were lucky to get real (pine?) wood 2 x 10's, not MDF, OSB, or other. Kids are all grown up. If I get tired of the painted faux/wood look, then I will put down a runner that I can change out. Wall to wall carpeting has so many limitations! 

sdanielmcev --- 9 years ago -

Hope you like sanding. 

andreweggplant --- 9 years ago -

Planning on doing mine but I am going to use the riser and step covers you can purchase. Not that expensive and will be some much easier than caulking and sanding. 

sdanielmcev --- 9 years ago -

You may want to think about an epoxy paint, like is used in garages. And, maybe tack on a bullnose . Remember, stairs are not supposed to be slick. 

TinktheSprite --- 9 years ago -

Using a palm sander then I will get corners right and at right angles with a detail sander. I have the Shop Vac going along side of it to reduce the dust. It almost works! The water putty sands smooth easily. My handyman charges $70/ hr. That's not a bad price. But I figured I've already saved $700 DIY.That's my motivation. Plus I have some free time before going back to work to do a good job. The stairs have a natural bullnose dead center leaning to a rustic look. Paint will be used in the risers. Pretty much decided on a faux light wood look to match the living room flooring. I'll try to comb in some grooves so that it's not perfectly smooth but also not rough on bare feet. Today, I'll sand the remaining 7 steps to smooth perfection! 

sheddy --- 9 years ago -

I've seen some pretty cool stairs painted on Pinterest. 

TinktheSprite --- 9 years ago -

I love Pinterest if not for the great ideas but to find a look that I have in mind to make sure it will look okay. This is the look I am going for. I have black balasters and dark oak handrails. The treads will match the floor and be blonder than the picture. I have more white stringer trim on the side and the newels and cap. But I think it will look nice.

https://8tracks.com/bbbkatiepie/love-is-nothing 

sheddy --- 9 years ago -

That will look really nice. You'll have to show us the before and after. 

Butterbean --- 9 years ago -

That will look really nice. You'll have to show us the before and after.

Agree. 

sdanielmcev --- 9 years ago -

Caulk and spackle will not accept stain or polyurethane as well as the wood will, not even the 'stainable' wood filler. Try it on a scrap piece of wood first.
Dan the Handyman charges a lot less than $70/hr. Like half that. Not only that but he's a nice guy. And all-around bon vivant. 

TinktheSprite --- 9 years ago -

sdanlemcev. A little late to the party, I see? I stated I had already caulked and used putty when I started this thread and have always intended to paint the stairs not stain. But I did use paintable caulk to fill in large gabs between the walls and the stairs. The stairs were not built for looks. The wood construction was almost as horrifying as the carpet. I am off to get a new palm sander. There was so much sanding to get to a smooth finish I have worn mine out. It's looking better now that I have applied primer. It's smoooooth! Just 7 more treads to prime and I can start painting, not staining. 

sdanielmcev --- 9 years ago -

The picture you posted shows stained treads. Smooth treads are a slipping/tripping hazard. 

TinktheSprite --- 9 years ago -

0

Halfway through the project. Still lots to do. But here's a peek so far. Like? 

Butterbean --- 9 years ago -

Looks pretty good from here. That's a lot of work! 

TinktheSprite --- 9 years ago -

Most of the work was sitting and watching the paint dry. Painting each step was surprisingly fast. But it had to dry. And I did half at a time, every other step so we could walk upstairs. It is not smooth and perfect wood by any stretch of the imagination. But for the total look within the house it's a winner, I think. Lots of details to finish, some kind of seal over it all, touch up, clean up etc. I noticed I still have blue tape on the wall. I must have walked up and down those stairs 100 times and only noticed it today! Just couple hours a day for 2 weeks. Not too much work. GAH! My grout is dirty!! I know what I'm doing next! 

Butterbean --- 9 years ago -

OH NO! Not dirty grout. 

mutton --- 9 years ago -

You amaze me Tink! Always the busy one! Nice going... 

page 1
Login to add your comments!

see more discussions about...


Online now:
hit counters

Terms of Service - Privacy Policy - Ice Box

Kingwood Underground