Kingwood Underground
the heart and soul of our Kingwood, Texas family
Login - Create Account - Help
Clean out your garage on Kingwood bookoo! Or find local garage sales on Yard Sale Search.com
KU Live!

Help!!!

who's talking here?

The Awe Inspiring JoelleDrees 2
Spunkin 1
tinman 1
texasracefan71 1
freebyrdll 5
waterfall 1
The Master 1

     » send to friend     » save in my favorites     » flag dangerous topic flag as a dangerous topic

The Awe Inspiring JoelleDrees (Mod) --- 12 years ago -

I managed to have a check slide down the keyboard cover of my baby grand piano and get lost inside the actual piano underneath the strings and hammers of the left side. How do I retrieve it? Apparently I'm not searching the correct terminology on Google because I can't find anything. Help? 

tinman --- 12 years ago -

so...within the context of your op....is the word "slide" a noun or verb. 

Spunkin --- 12 years ago -

I found this -- hope it helps
http://www.petesummers.com/fallboard.html 

waterfall --- 12 years ago -

First you get a sledgehammer... 

texasracefan71 --- 12 years ago -



Jump to about the 3 minute 45 second mark. 

freebyrdll --- 12 years ago -

Hair dryer.... Blow it out 

The Master --- 12 years ago -

Hair dryer.... Blow it out

Smart!

Also try attaching some tape to the end of a stretched out metal hanger if it will fit b/w the sides.

If you can get it to stick, slowly bring it close to the edge and use tweezers to grip firmly and pull until release. 

freebyrdll --- 12 years ago -

Is it your own or one from a student? (the check, that is) 

The Awe Inspiring JoelleDrees (Mod) --- 12 years ago -

It's one from a student. I can get her mom to write a new one, but I'd like to see if I can try to retrieve it.

I'll have to watch the video when I'm not on my iPhone. 

freebyrdll --- 12 years ago -

Are you at the piano? 

freebyrdll --- 12 years ago -

The cross section in figure A of a grand piano shows how the grand fallboard (the cabinet part with the maker's name on it that drops down over the keyboard) creates a kind of natural chute directly into the action for pens, pencils, small toys and just about anything else that might be setting on the music rack. Fortunately, retrieval of these fallen objects is fairly easy on most modern grands such as Yamaha, Samick, Kawi, Young Chang, Steinway, Baldwin, etc. On those models, the fallboard may simply lift off. On older grands a few wood screws may need to be removed.

As can be seen in these illustrations, the fallboard sets on metal pins inserted into the cabinet on either end of the keyboard. The inset in figure A shows the metal bracket attached to the edge of the fallboard. The whole fallboard pivots on these pins and brackets, so as to be raised or lowered over the keyboard at your whim. In most cases it should lift easily up and out. On older models there may be a small set screw that holds the fallboard tight on the pins, as shown in the inset of figure B. If so, you'll need to loosen the set screws with a small screwdriver (it shouldn't be necessary to remove them altogether). In either case, just grip the top of the fallboard and lift it off the pins and out of the way (some can be pretty heavy so be ready to set it down someplace other than your toes).

With the fallboard removed you'll be able to see directly into the action and you may be amazed, delighted or disgusted at what you find has dropped in there, especially if you have small children. After retrieving the junk, replace the fallboard by aligning the brackets on the pins and setting it back into place. Raise and lower it once or twice just to make sure it's resting on the pins.

Unfortunately, life is not made so easy on some older grands where the fallboard is connected to the endblocks (the blocks of wood at either end of the keyboard) and requires that both the endblocks and the keyslip (the thin strip of wood that runs horizontally in front of the keys) be removed.

If you don't see the little brass plates on the ends of the fallboard (inset, figure B), then you probably have one of these older grands. The screws holding those two cabinet parts are usually underneath the piano, if you wish to venture into trying to remove them -- see recovering keys for an illustration. This will require you to lie on the floor and remove all the screws that the cabinet maker happened to have in his shop at the time. This may be more effort than the average owner wants to jump into, however, though it's easy enough for your piano tuner to routinely retrieve items from the action when tuning the piano.

Mobile Site Return to top How to order Regulating tools Tuning levers 

freebyrdll --- 12 years ago -

Good luck! 

page 1
Login to add your comments!

see more discussions about...


Online now:
hit counters

Terms of Service - Privacy Policy - Ice Box

Kingwood Underground