Kingwood Underground
the heart and soul of our Kingwood, Texas family
Login - Create Account - Help
Clean out your garage on Kingwood bookoo! Or find local garage sales on Yard Sale Search.com
KU Live!

Sheet Metal Company/Mechanic to do a project for us....

who's talking here?

tinman 1
sweetscreaminmonkey 1
u uic 1
Winning 1
scipsekatattes 1
tredanis 2
shiney side up 1
JakeBob 1

     » send to friend     » save in my favorites     » flag dangerous topic flag as a dangerous topic

scipsekatattes --- 14 years ago -

Do any of you know anyone in the Humble area (20 mile radius) that knows how to cut/fold/create something out of sheet metal and do a good job that can do it NOW?

We need to have a metal panel made to go inside one of our test trucks. It will be appx 24" long, 10" tall, 4" deep at top and 7" deep at bottom...so not huge. The face will have a tilt angle. We'll need the metal to be about a 3/16" thick.

This requires some welding as it will have hinges on the bottom to open and close.

Anyway...we found a guy in Humble that said he can do a precise expert job (he has a shop that does this specifically..metal work), but said he cannot get to it for two more weeks and we need it this coming week IN the truck.

Any referrals? 

tinman --- 14 years ago -

As a commercial hvac contractor, I can tell you with little doubt that any of the sheet metal companies I deal with are two weeks out on everything.

I would try a welding shop. Those guys will even come to your location, with raw materials, and fab and install on site.

Good Luck 

sweetscreaminmonkey --- 14 years ago -

my bf's co worker has a sheet metal company bf helps out with on the side.. they have been in buisness for about 30 yrs they are off 45 though not sure if that would be too far.. if so i can ask around bf is in that business and worked in humble and would have contacts. 

tredanis --- 14 years ago -

oh goody! i cannot wait for the thread where you come on here trashing the sheet metal worker for not delivering on time and complaining about the shoddy workmanship, all the while taking absolutely NO RESPONSIBILITY for your own actions and the fact that you waited LAST MINUTE and gave less than a week lead-time to complete a two-week job!

I expect said thread within the next two weeks. BOOK IT!

/lock thread 

Winning --- 14 years ago -

oh goody! i cannot wait for the thread where you come on here trashing the sheet metal worker for not delivering on time and complaining about the shoddy workmanship, all the while taking absolutely NO RESPONSIBILITY for your own actions and the fact that you waited LAST MINUTE and gave less than a week lead-time to complete a two-week job!

Ha! You know her well! 

tredanis --- 14 years ago -

Ha! You know her well!

yes, unfortunately i stumbled across a few of her threads. never anything positive to say, at least from what i have read. 

u uic --- 14 years ago -

3/16 is a chunck of steel not easy to bend or cut. 

shiney side up --- 14 years ago -

You are not looking for sheet metal anything thats steel plate, you probably won't even be able to pick it up by hand after it's made.

I had a referral until I read the other posters. 

JakeBob --- 14 years ago -

This should be very easy. You only have to find a shop that can bend steel plate, has high quality workers, has nothing to do right now but wait for your job, and you probably want it done cheap. Oh and is located close by.

Good Luck 

page 1
Login to add your comments!

see more discussions about...


Online now:
hit counters

Terms of Service - Privacy Policy - Ice Box

Kingwood Underground