Kingwood Underground
the heart and soul of our Kingwood, Texas family
Login - Create Account - Help
Clean out your garage on Kingwood bookoo! Or find local garage sales on Yard Sale Search.com
KU Live!

sprinkler freeze repair please read

who's talking here?

Grammyx2 1
grasshopper 1
Banjos and Squealing Pigs 1
Gigix4 4
Dr Aborto 1
frank 7
dawndelion 3
Ordinary Guy 1

     » send to friend     » save in my favorites     » flag dangerous topic flag as a dangerous topic

frank --- 15 years ago -

I am a licensed irrigator LI#16950. Owner of Texas Rain Solutions. If you have issues with pipes leaking and backflow device failures, please take this advice. Even if you dont call my company. Please call a sprinkler company. You will save hundreds. I must have services over 200 calls last year to find out the neighbor paid a plumber $700-$900 to do the same thing I was doing for $300. When people see water they tend to call a plumber. When this is actually a sprinkler issue. For instance our service calls are $65. and after hour emergency calls (late night) are $100. Now we will generally waive the service call if they sign a repair agreement. Our repaire cost is usually $125 and replacement cost is $300. Depending on the unit to be repaired. Most other companys should be in this same price range. Plumers though are usually double what a licensed sprinkler guy would charge. Also if you drian your backflow it will help decrease your chance of failure. So keep that in mind. You can send me a message or email me with any questions at texasrainsolutions@yahoo.com I will be glad to help or give advice as much as I can. 

Banjos and Squealing Pigs --- 15 years ago -

Any advice on the best way to prepare the system for the upcoming freeze?

That would be very valuable to us KU'ers 

Gigix4 --- 15 years ago -

I hope I'm ready. I had my sprinkler system guy come out prior to the last freeze and we could never find the shut-off valve that is supposed to be near the water meter. He did pull a vacuum to suck out as much water as he could and has it shut off then double insulated the pipes.
Fingers crossed after last year's experience. 

frank --- 15 years ago -

Unfortunatly the only thing easy to do. Is to drain your backflow device. Cover any inlet sides of the system that is above ground. Up north they install air chucks inline, so you can use compressed air to blow out the line. You dont see that here because of the temperatures. Draining the backflow will decrease the chance of backflow failure. 98% of all the issues last year were from backflow failure. The bonnet and popet inside the backflow are plastic. So when the water in the bowl freezes the plastic cracks and the bonnet pops off and you have a gyser. The other issue is the ball valves can expand and break the brass housing. You turn the inlet side off, and leave the outlet on. Open the two drain valves 1/4 turn to open them up. Gravity will typically drain the water out of the supply pipe on the outlet side. You need to wrap the brass valve because it is under pressure from the mail water supply. I would say if you did that your probably 80% covered. They do make a heated cover but only a few companys carry this, and I am not one that does. I have not had any backflows that I have drained this way fail yet. So I am confident that will due. 

Ordinary Guy --- 15 years ago -

Listen folks, what Frank is saying is accurate. However don't get taken advantage of opportunistic unscrupulous people. A service call for should not cost more than $65, and the internals of the PVB cost $15. A complete new PVB is only $75. So make sure you don't pay anything over a standard mark up. I advise anyone that is asked to pay $300 for a PVB repair to contact the Texas Attorney General 

frank --- 15 years ago -

If you pay $300 for the pvb I would agree. Although $300 for Parts and Labor is way more than fair. The pvb is $78 plus tax at lowes. You need to have it recertified witch if you call around will run you $100 and that leaves $100-$125 labor to do the work. That is very reasonable. There are those who do sell the part for $300 and that is wrong. IF you can buy the kit for $15 please post I pay $35 plus tax. I would love to find out where you found these for $15. 

Grammyx2 --- 15 years ago -

Frank, I sent you an email. 

frank --- 15 years ago -

If that doesnt help or you need more info feel free to call. 

Gigix4 --- 15 years ago -

I guess we won't know if the sprinkler systems froze up or not until later this evening. Not going to get up above freezing until around 3:00 this afternoon. 

frank --- 15 years ago -

You should be good. It didnt freeze hard enough yet to freeze the pipes under ground. If you had a problem above ground it would have shown by now. Best thing to do is leave the system off. Untill at least a day after the freezing weather passes. 

Gigix4 --- 15 years ago -

Best thing to do is leave the system off.

No problem ... I plan to leave it as is until spring. If I need to water before then, I have those cheapy things to attach to the hose, 

dawndelion --- 15 years ago -

I just came home too a broken valve, water every where! 

Dr Aborto --- 15 years ago -

I just came home too a broken valve, water every where! 

Next time, follow this video on how to release the valve.
KU thread with how to Video. 

Gigix4 --- 15 years ago -

I just came home too a broken valve, water every where!
Been there done that. I'm sorry you have to deal with it and hope I don't ever have to do it again! 

dawndelion --- 15 years ago -

thanks, have emailed Frank> 

dawndelion --- 15 years ago -

Frank is on his way, will give KU a report when he leaves.... 

grasshopper --- 15 years ago -

What is Franks phone #? We have issues!! 

frank --- 15 years ago -

Grasshopper I sent you a message. 

frank --- 15 years ago -

My number is 281-570-7644. 

page 1
Login to add your comments!

see more discussions about...

advice
recommendations
services


Online now:
hit counters

Terms of Service - Privacy Policy - Ice Box

Kingwood Underground