Kingwood Underground
the heart and soul of our Kingwood, Texas family
Login - Create Account - Help
Clean out your garage on Kingwood bookoo! Or find local garage sales on Yard Sale Search.com
KU Live!

Does anyone know how to do brakes?

who's talking here?

outermaga 3
Fancy 1
XCPuff 1
Clown Vomit 7
Cicero 1
chris 1
Fin and Feather 1
offroad4by4 1
KwdIzMyNwHome 9

     » send to friend     » save in my favorites     » flag dangerous topic flag as a dangerous topic

KwdIzMyNwHome --- 19 years ago -

Ok the DH has decided rather than pay hundreds to replace our rotors and pads on the car that he wants to try and do it himself. Does anyone do this on the side that might want to take a crack at it? 

Clown Vomit --- 19 years ago -

I did it all through high school and college to my own vehicles, because I was always too broke to pay for a mechanic. If I can do it, anyone can. It's really not that hard. 

KwdIzMyNwHome --- 19 years ago -

Do you have the tools to do it or is it something you can do with just normal tools that a man would have around....the DH says he doesnt think it's that hard either so that's why he wants to do it - Its soooo expensive to take it somewhere. 

Clown Vomit --- 19 years ago -

Basic tools are all thats required for a basic pad/shoe and rotor change. He'll have to have the rotors turned professionally, though, unless he's planning to replace them outright with brand new parts. You can probably google 'break job' on your specific vehicle and find a basic how-to out there. At least he'll have a better idea of what's involved. 

outermaga --- 19 years ago -

My ex-BIL does this on the side.. do you want his #? 

KwdIzMyNwHome --- 19 years ago -

My ex-BIL does this on the side.. do you want his #? Yes give me his number pleeeezzzzeee! 

KwdIzMyNwHome --- 19 years ago -

We bought new rotors off of ebay and we'll be buying new pads....so he's not insane? its really easy enough? 

Clown Vomit --- 19 years ago -

Should'nt be any problems...only difficult part I can forsee is installing/packing the bearings into the new rotors. That was always the worst part for me. 

outermaga --- 19 years ago -

I will call my ex-MIL to get his #. He works at a Brake place in Atascocita but he does side jobs too. I have heard from my brother's that it is really easy to do if your hubby wants to try it first. Tell him to do one side at a time so he has the other side to copy from. That is one tip I have been told ;-) 

KwdIzMyNwHome --- 19 years ago -

Any advice on what NOT to do? if that's the worst part do you have advice? we're thinking the caliper might be stuck :-( 

Clown Vomit --- 19 years ago -

I never had a stuck caliper, but draining the brake lines might relieve some of the pressure on it. 

XCPuff --- 19 years ago -

I never had a stuck caliper, but draining the brake lines might relieve some of the pressure on it. sexual chocolate 

Clown Vomit --- 19 years ago -

:O 

outermaga --- 19 years ago -

I put in a call to my ex-MIL to get the # for you it might be a little bit :-) 

KwdIzMyNwHome --- 19 years ago -

Yes he thought he would have to drain the lines...maybe he does know what he's talking about after all! lol - i get scared when it comes to brakes 

Clown Vomit --- 19 years ago -

lol - i get scared when it comes to brakes No worries - you've got airbags, right? :) 

KwdIzMyNwHome --- 19 years ago -

Yep and the car is garage kept most of the time anyway...thanks for the advice! 

Cicero --- 19 years ago -

I've never paid for a brake job. Front brakes shouldn't take more than 10 mins for a mechanically inclined DYI'er. Make sure that he has some big C-Clamps before starting the project. He'll need them to push the caliper pistons back into the caliper housing. Careful not to marr them. No need to drain the lines unless you're replacing seals. No need to replace seals unless they're leaking. Rear drum brakes are a little harder. Do one side at a time in case you forget how everything goes together. Most newer cars have rotors that are independant of the hub therefore no need to worry about bearings. 

Clown Vomit --- 19 years ago -

Yeah there is a sh*tload of little parts inside the rear drums...springs and clips. 

KwdIzMyNwHome --- 19 years ago -

i'm so not mechanical but i'm showing him for sure -thanks so much! 

chris --- 19 years ago -

If you have rear disk breaks then you need to "wind" the piston back into the caliper. 

offroad4by4 --- 19 years ago -

One common mistake is when you place the C-clamp on to press the "brake cylinders (calipers) apart" to fit over the new thick brake pads, take it very slow and MAKE SURE to back the piston evenly (using the old brake pad as a level for the C-clamp). If the cylinder twists while he is tightening the C-clamp and it scratches the inside, brake fluid can leak out the "scratched groove" once it is put under pressure. Just take it nice and slow. 

Fin and Feather --- 19 years ago -

I have done my own for last 12 years; this is not hard if you know a few things from the start. 1) When using new rotors, do not think this saves time, you still have to turn them to make sure they are truly round. If this is skipped you can get a pulsating feeling when trying to stop. 2) Use ceramic pads, they reduce break dust, squeal, and last longer. 3) Clean all slides well and reapply caliper grease. Forgetting this step can cause calipers to stick, and having to do the whole job over sooner than desired. 4) When using a c-clamp to compress caliper use an old pad to cover hole in plunger, and open vent valve to expel fluid. Close valve before backing off c-clamp. 5) BREAK FLUID WILL STRIP PAINT OFF METAL, FENDERS, HOOD, HOWEVER WILL BRING LIFE TO OLD HAZZY HEADLAMPS. 

Fancy --- 19 years ago -

I'm a girl, and have done my brakes. It's a dirty job but not real hard. 

KwdIzMyNwHome --- 19 years ago -

Ok well the DH did the brakes this weekend with a little help from a freind that is a mechanic that was SOOO nice to come over and make sure everything was done right. The new rotors are soooo shiny! Thanks everyone for your help and advice! Photo Sharing and Video Hosting at Photobucket 

page 1
Login to add your comments!

see more discussions about...

advice
connecting
deals
help


Online now:
hit counters

Terms of Service - Privacy Policy - Ice Box

Kingwood Underground